If you've got a duct run that needs wrapping, AC risers, extract shafts, a plant room, a rooftop chiller line, you need an aluminium cladding sheet for duct that's cut tight, sealed properly, and fitted so it doesn't rattle or streak in six months. That's the job we do. We come out, measure the run, work out the sheet size and thickness that suits the duct and the insulation underneath it, fabricate it, and fit it on site.
We work right across the UAE, Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. Whether it's a single duct in a villa plant room or a full riser cladding job on a commercial building, the process is the same: measure, fabricate, fit, seal.
How Fast Can We Come and Measure?
Fast. Most duct cladding jobs don't need a long lead time to quote, we just need to see the run, check access, and note whether it's insulated ductwork or bare metal underneath. A call or a WhatsApp message with a few photos and the rough length is often enough to give you a realistic idea of what's involved before we even get on site. Send us the details and we'll tell you the same day when we can come and measure properly.
Call us or message on WhatsApp to arrange a site visit.
What Aluminium Cladding Sheet for Duct Actually Involves
Cladding a duct isn't just wrapping metal around a box. The duct has a shape, corners, joints, and usually a layer of insulation underneath that has to stay dry and intact. The cladding sheet sits over that insulation as a weather and knock-resistant skin. Get the folds wrong, or leave gaps at the joints, and you get water tracking in, insulation getting wet, and the duct sweating on the inside. In this climate, with the AC running most of the year, that causes real problems fast.
We measure the duct run properly before we cut anything: length, width, height at each section, corner angles, and where the joints and expansion gaps need to sit. Then we fabricate the sheets to size, fold them on a brake to match the profile, and fit them with the right overlaps so water runs off rather than in.
What Is Cladding Aluminum Sheet?
Cladding aluminium sheet is a thin aluminium panel, usually mill finish or plain painted, used as a protective outer skin over ductwork, pipework or insulation. It's not structural, it doesn't hold anything up. Its job is to protect the insulation underneath from weather, UV, knocks and general wear, while giving a clean, finished look to plant rooms, risers and exposed duct runs.
Sheet Metal for Duct: Thickness and Size
The aluminium cladding sheet size and thickness depend on where the duct sits and how exposed it is. A duct tucked inside a plant room doesn't need the same gauge as one running across an exposed rooftop in Abu Dhabi or Fujairah, taking full sun and salt air. Thicker sheet holds its shape better on long runs and resists dents from foot traffic near walkways, but it costs more and is heavier to handle on site. That's the trade-off we talk through with you before fabrication starts.
| Use | Typical gauge range | Notes |
|---|---|---|
| Indoor plant room duct | Lighter gauge | Low exposure, easier to handle and fit |
| Rooftop or external duct | Heavier gauge | Needs to resist UV, sand abrasion and wind loading |
| High-traffic or accessible areas | Heavier gauge | Resists dents and accidental knocks |
Sheet size runs in standard stock widths and lengths, but we cut and fold to the actual duct dimensions rather than forcing a standard panel to fit. That's what stops you ending up with visible joints every metre and a patchy finish.
Metal Sheet for Ducting and Insulation
Most duct cladding goes over insulation, not bare metal. The aluminium cladding sheet for insulation has to allow for the extra thickness the insulation adds, and the corners have to be folded to keep the insulation compressed evenly, not crushed in one spot and loose in another. If the insulation gets compressed unevenly, you lose the thermal performance in that section, and on AC ductwork that shows up as condensation and drips exactly where the insulation's thin.
We check what insulation is already on the duct, or specify it if it's a new run, before we cut the cladding sheets. Sheet metal for ductwork that's fitted without accounting for the insulation layer underneath almost always ends up loose, oil-canning, or with visible seams that don't line up.
Aluminium Sheet Wall Cladding vs Duct Cladding
People sometimes ask for aluminium sheet wall cladding when what they actually need is duct cladding, or the other way round. Wall cladding is decorative and structural, fixed back to a building face, it's about the finish and how it sits on the substrate. Duct cladding is functional first: it has to seal against weather and protect insulation, with the finish being secondary. The fixings, the overlap detail and the sealant used are different for each, so it's worth being clear which one you're asking about when you get quotes in.
Aluminium Solid Sheet Cladding: Finish Options
For duct work, plain mill finish or a painted aluminium sheet is standard, it doesn't need to look decorative, just clean and weatherproof. Where the duct is visible, in a reception plant area, a rooftop that's overlooked, or anywhere the finish matters, powder-coated aluminium solid sheet cladding gives you a colour-matched, durable surface that won't chalk or fade the way a cheap painted finish does under UAE sun. Anodised finishes are an option too, though for most duct work the cost doesn't usually justify it over a good powder coat.
Aluminium Cladding Sheet Price in UAE, What It Depends On
We don't put figures on this page, because every duct run is different and a number without a site visit is a guess. What the aluminium cladding sheet price in UAE actually depends on is straightforward though: the length and shape of the run, the sheet thickness and finish you choose, how much cutting and folding the corners and joints need, access on site (rooftop versus ground level plant room makes a real difference to labour time), and whether insulation needs supplying as part of the job or is already there.
The way we work out an aluminium cladding sheet price is to measure first, confirm the spec with you, gauge, finish, insulation, and then price the material and the fitting together. That way the number you get is for the job in front of us, not a generic rate that changes once we're on site.
Aluminium Cladding Sheet Suppliers in UAE, What to Check
If you're comparing aluminium cladding sheet suppliers in UAE, a few things are worth asking before you commit:
- Do they measure on site before quoting, or price off a phone description?
- Do they fabricate the folds and corners to your duct's actual shape, or fit standard flat panels with extra sealant to hide the gaps?
- What sheet thickness and finish are they actually quoting, ask for the spec in writing
- Who fits the sheet, the same people who fabricate it, or a separate crew who didn't take the measurements?
- What happens to the insulation underneath during the fit, is it protected, or left exposed while work's in progress?
A duct cladding job that's rushed or fitted from stock panels without proper folding shows up fast in this climate. Sun on aluminium expands and contracts it daily, and loose fixings or poor overlaps work themselves worse over a season, not better.
What Customers Say
Needed a rooftop duct clad before the AC contractor signed off the job. They measured, came back with the sheets folded to fit, and it was done in a day. Clean finish, no gaps at the joints. Reviewer, Sharjah
Plant room ducting in our building in Abu Dhabi was cladded properly, insulation intact, no more sweating on the pipework since. Reviewer, Abu Dhabi
Get a Site Visit Booked
Aluminium cladding sheet for duct work is easier to price accurately once we've seen the run. Send the length, a few photos, and your area, and we'll tell you when we can get out to measure. We cover Dubai, Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah.
Call now or message on WhatsApp to get a date for measuring.
